 |
 |
 |
 |
 |
|
|
 |
 |
Dymet Corporation Press
Tonnage Capabilities
|
The Advantages of the Powder Metal Process |
More About Dymet's Capabilities |
Determining factors in the compaction of Powder Metallurgy parts are the projected area of the part and the material used. The projected area is the shadow cast by the part if a light source was shown from the direction of compaction.
This
chart shows the area allowed for the various press tonnages available.
| Fe | SS | Brass & Bronze |
Aluminum | |
| 4 ton | 0.12" | 0.12" | 0.22" | 0.32" |
| 5 ton | 0.12" | 0.12" | 0.22" | 0.42" |
| 12 ton | 0.32" | 0.32" | 0.52" | 1.02" |
| 20 ton | 0.62" | 0.42" | 0.82" | 1.72" |
| 30 ton | 0.92" | 0.72" | 1.22" | 2.52" |
| 50 ton | 1.42" | 1.12" | 2.02" | 4.22" |
| 100 ton | 2.92" | 2.22" | 4.02" | 8.32" |
| 125 ton | 3.62" | 2.82" | 5.02" | 10.42" |
| 200 ton | 5.72" | 4.42" | 8.02" | 16.72" |
| 500 ton | 14.32" | 11.12" | 20.02" | 41.72" |
Maximum finished part height for our presses:
| 4 ton | 1/2" |
| 5 ton | 1/2" |
| 12 ton | 1/2" |
| 20 ton | 1 5/16" |
| 30 ton | 1 5/8" |
| 50 ton | 1 5/8" |
| 100 ton | 2 1/8" |
| 125 ton | 4" |
| 200 ton | 2 7/8" |
| 500 ton | 4" |
Copyright 1999 - 2004 -- All Rights Reserved
Dymet Corporation
1901 Peck Street
Muskegon Michigan
49441
Phone: 231-726-5061--- Fax: 231-728-1465
email: dymetcorp@dymetcorp.com
We value your privacy. See our policy for more information.